Covering 13 ZIP codes
Chimney Relining in Irving, TX
Relining matters less in Texas than in the older states, simply because so much of the housing has a metal chimney system rather than a masonry flue. Where there is masonry, the rules are the same everywhere.
- Covering 13 Irving ZIP codes
- Free to use, no obligation
Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.
Call about chimney relining in Irving
(844) 785-4066No charge to you, and you are never committed to going ahead.
What happens when you call
- You describe the problem and where you are.
- We put you in touch with a licensed contractor covering that area.
- They arrange the visit and agree the price with you directly.
Worth having to hand
- Roughly how old the system is
- What it is doing — or not doing
- Your ZIP code
What to ask for on Chimney Relining in Irving
- Stainless liners sized to the appliance
- Insulated where the chimney runs cold
- Older metro and East Texas masonry
- Lifetime-warranted systems
- Licensed & insured Every company we put you through to holds current licensing and insurance.
- Know what to ask You are told what actually decides the price, so you can judge a quote.
- Free to use There is no charge to you. Compare quotes and walk away at any point.
- Calls answered 7 days Someone picks up seven days a week, weekends included.
How it works
Three steps, no obligation at any of them.
-
1
Call and tell us what is wrong
Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and no charge to you — the contractor pays us, which is how it stays free at your end.
-
2
A local contractor gets in touch
A local chimney company contacts you to discuss the problem and arrange a visit in Irving. What they charge to attend or diagnose is theirs to set, so agree it with them up front.
-
3
You decide
Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and no charge to you either way.
What these repairs look like
Illustrative examples of the work described here. More in our disclaimer.
Chimney Relining in Irving
Two things shape chimney work in Irving: the age of the building stock, and what the weather does to masonry that has been standing in it for decades. The chimney is rarely the thing that changed — what changed is usually what vents into it.
66% of homes in Irving heat with electricity, so a fireplace here is used by choice rather than by necessity and tends to be inspected far less often. (US Census ACS 2022)
Movement and liners
Where soil movement has cracked a masonry chimney, a liner is not a structural fix. It isolates the flue gases from the masonry, which is worth doing, but a stack that is moving still needs the movement addressed.
Cast-in-place where the masonry is poor
Poured to form a new flue inside the old one, adding structural strength to a deteriorated chimney. More expensive and slower, but the right tool on a stack that is failing structurally as well as at the flue.
Warranty conditions
Good stainless systems carry lifetime warranties conditional on professional installation and annual maintenance.
When a Texas chimney needs relining
Three cases. An older masonry flue whose tiles have cracked or whose joints have washed out. A change of appliance where the existing flue is now the wrong size. And after a chimney fire, which can crack tile along the whole length of a flue without anything being visible from either end.
What Texas does not have much of is the northeastern case — a coal-era chimney converted twice. Most older Texas masonry was built for wood or gas from the start.
Sized from the appliance
Diameter comes from the manufacturer's venting tables, not from what fits down the flue. Ask to see the table.
Factory-built systems are not relined
If the chimney is a metal system inside a framed chase, it is not a masonry flue and it is not relined — the pipe is replaced with the manufacturer's components, or the system is replaced. Confusing the two is the most common mistake made on Texas housing.
The full guide: everything about chimney relining — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Irving.
Areas we cover in Irving
We work throughout Irving, including the areas around Barton Estates area, Belt Line, Broadmoor Hills and Campion Trail.
Chimney Relining in Irving — FAQs
Do you charge for a quote in Irving?
There is no charge to you at any point. What a company charges to attend or to carry out an inspection is theirs to set, so agree it with them before they come out. An inspection is a real piece of work with a written report attached, and it is reasonable for it to be chargeable.
How often should a chimney be inspected?
Annually, whatever it vents — that is the NFPA 211 standard and it covers gas and oil appliances as well as wood. Sweeping frequency is separate and depends on what and how much you burn. An appliance used twice a year still needs the annual look, and those are the ones where neglected faults turn up.
Do we need a chimney liner?
If a camera survey finds cracked tile, washed-out joints or a separated liner, yes. You also need one whenever the flue is the wrong size for the appliance now venting into it, which is the common case after any change of fuel or appliance. A liner is sized from the appliance manufacturer venting tables, not from what happens to fit down the chimney.
What does a Level 2 inspection include?
Everything in a Level 1 visual check, plus a camera survey of the entire flue and an examination of accessible attic, crawl space and basement areas. It is required on a property transfer, on any change of fuel or appliance, and after a chimney fire. A general home inspection does not include it.
Is chimney waterproofing worth doing?
On sound, porous, exposed masonry it genuinely slows the water absorption that destroys brick. On masonry that has already started to flake it is worse than doing nothing, because it traps water behind the damaged face. And it has to be a breathable repellent rather than a film-forming sealant — the film is what causes the damage people then blame on waterproofing.
What qualifications should a Irving chimney company have?
Ask for three things and check them: current liability insurance, CSIA certification from the Chimney Safety Institute of America, and whatever license or registration your state requires for the work in question. Ask to see the documents rather than taking the logo on the van as proof. For anything involving gas appliance venting, ask separately who is pulling the permit.
We have a metal chimney in a chase. Can it be relined?
No — that is a manufactured system, not a masonry flue. Damaged sections are replaced with that manufacturer's parts.
How long does a stainless liner last?
Warranted for the life of the home on good systems, conditional on correct installation and annual maintenance.
Neighborhoods we cover in Irving
Chimney work across Irving and the areas around it.
- Barton Estates area
- Broadmoor Hills
- Centennial Park
- Dallas City Hall
- Dealey Plaza
- Fritz Park Petting Zoo
- Hospital District vicinity
- Irving Convention Center
- Jackie Townsell Bear Creek Heritage Center
- Las Colinas North
- Levy Event Plaza
- MacArthur Boulevard corridor
- Majestic Theatre
- Mandalay Canal Walk at Las Colinas
- Mustangs of Las Colinas
- Northgate West
- Park Place
- Quail Run Condominiums area