Independent contractors, licensed in TX

635 cities and towns covered

Chimney Damper Repair in Texas

In a house running air conditioning eight months of the year, an open damper is conditioned air leaving through the roof — and most Texas dampers are clamped open on purpose.

Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about damper repair

(844) 785-4066

No charge to you, and you are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Damper Repair in Texas

What to ask for on Chimney Damper Repair

  • Throat damper repair and replacement
  • Top-sealing dampers with silicone gasket
  • Gas log damper clamp verification
  • Doubles as a rain cap
Call us about this
  • Licensed & insured Every company we put you through to holds current licensing and insurance.
  • Know what to ask You are told what actually decides the price, so you can judge a quote.
  • Free to use There is no charge to you. Compare quotes and walk away at any point.
  • Calls answered 7 days Someone picks up seven days a week, weekends included.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and no charge to you — the contractor pays us, which is how it stays free at your end.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and no charge to you either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Stainless chase cover replacing galvanized in Texas
Stainless chase cover replacing galvanized A cross-break sheds water to the edges instead of ponding in the middle and rusting through.
Movement cracking assessed before repointing in Texas
Movement cracking assessed before repointing A stepped diagonal crack is the soil moving the chimney. Repointing it without that is temporary by definition.
Gas log set serviced and reset in Texas
Gas log set serviced and reset Burner ports cleared, pilot assembly cleaned, gas pressure checked, logs returned to the specified layout.

The clamp everybody forgets

A vented gas log set requires the damper to be permanently fixed part- open so combustion products cannot spill into the room. Installers do that with a clamp, and a decade later nobody remembers it is there.

It is correct for the appliance. It is also a permanent opening in the building envelope, and in Texas the cost lands on cooling rather than heating — conditioned air going up the flue through a long hot summer.

Check the clamp is still present

A clamp removed by a previous owner, or by someone sweeping the chimney, leaves the damper able to close. On a vented gas set that is dangerous.

You cannot fit a top-sealing damper over one

While a vented gas appliance is in place, the flue has to stay open. A top-mount damper is only an option on a wood-burning or genuinely unused fireplace.

Throat dampers on wood and unused fireplaces

Where the fireplace burns wood or nothing at all, the damper should seal. The cast or pressed plate most houses have is metal on metal and was designed to close rather than to seal, and decades of soot and heat make it worse.

Repair before replacement

A seized damper is often just fouled. Cleaning the seat and pivot and freeing the mechanism restores it.

Top-sealing is the better upgrade

A top-mount damper closes at the crown with a silicone gasket, seals properly, keeps the whole flue dry and doubles as a rain cap.

Chimney Damper Repair — frequently asked questions

How do I know if mine seals?

Look up into the throat with a light. It should sit flat when closed. A draft with it shut means it is not sealing — or that it is clamped open deliberately.

Ours is clamped open. Is that wrong?

Not if you have a vented gas log set — it is required. It does mean the opening is permanent.

Is a top-mount worth it?

On a wood-burning or unused fireplace, yes. Not an option while a vented gas appliance is fitted.

Mine is rusted solid.

Often freeable by cleaning the seat and pivot. A cracked or warped plate is the point to replace.

Does an open damper really cost much?

In a Texas summer, yes — it is conditioned air leaving continuously through an opening the size of the fireplace throat.

Call now How it works